Filter
Top Products
Page 14
TV Installation
1. Make sure the power of the TV and your receiver is
turned o.
2. Obtain a Coaxial SPDIF cable, connect it to your
receiver’s coaxial SPDIF digital input and the Coaxial
SPDIF connection on the LINE OUT port o the back
of the TV.
3. Turn on the TV and your receiver.
Note:
• If you want pure digital stream for your receiver
to decode, you must also congure the TV’s OSD
Sound->Digital Audio Out function. Make sure
the option is on Bit Stream.
• If your receiver is making static noises when
receiving Bit Stream, you must use the PCM
option instead.
• Refer to the receiver’s manual to make sure the
receiver is congured to receive signals correctly
from the TV
Connecting with Digital Optical (Best)
1. Make sure the power of the TV and your receiver is turned
o.
2. Obtain a 3.5mm stereo/audio cable (if your amplier
audio connection requires RCA audio out jacks you
will need to obtain an 1/8” Stereo Mini Plug to RCA
adapter cable). Connect it to your receiver’s audio input
connection and the 3.5mm stereo/audio connection on
the Analog Audio port on the back of the TV.
3. Turn on the TV and your receiver.
Note:
• If you want pure digital stream for your receiver to
decode, you must also congure the TV’s OSD Sound-
>Digital Audio Out function. Make sure the option is on
Bit Stream.
• If your receiver is making static noises when receiving
Bit
• Stream, you must use the PCM option instead.
• Refer to the receiver’s manual to make sure the receiver
is congured to receive signals correctly from the TV
Connecting with RCA Audio Analog (Good)
CONNECTING TO AN EXTERNAL AMPLIFIER OR AMPLIFIED SPEAKERS
1. Make sure the power of the TV, and source is turned o.
2. Connect source to the HDMI port on the transmitter end of the
extender, using an HDMI cable.
3. Connect the transmitter to the RJ45 port in the TV with category
cable.
4. Note: Power may need to be supplied to HDBaseT transmitters
not equipped with a Power over Ethernet feature.
PLAY
CONNECTING WITH HDBASET