Filter
Top Products
Page 50
Using LINK Operation
CONTROLLING HDMI EQUIPMENT USING LINK OPERATION CONTINUE
LINK SETUP
Make the settings to use LINK Operation. Set the settings with "Initial Setup" > "Advanced" >
"SunBrite LINK Setup".
Link Operation
Select LINK Operation Control to disable the LINK function even when a LINK-compatible
HDMI device is connected to the TV. This function prevents the device from starting to operate
unexpectedly.
Auto Power On
If this is activated, the One Touch Play function is enabled. While the TV is in standby mode, it
automatically turns on and plays back the image from the HDMI source.
Audio Return Channel
This function allows you to listen to the TV audio via audio equipment without using an optical
ber cable, which conventionally is required.
Requirements for using an ARC-compatible AV amplier:
• ARC-compatible AV amplier connected to the ARC-compatible HDMI terminal. (HDMI 3)
• (Refer to the operation manual of the ARC-compatible equipment for details.)
• Use of an ARC-compatible cable.
Auto: You can listen to the TV audio with ARC-compatible audio equipment.
O: This function does not work.
NOTE
• If the TV audio cannot be output from the AV amplier even after making the necessary
settings, connect the TV to the AV amplier with an optical ber cable and select "O".