Filter
Top Products
SUPERSERVER 6012L-6 Manual
4-2
4-2 General Safety Precautions
Follow these rules to ensure general safety:
l Keep the area around the SuperServer 6012L-6 clean and free of
clutter.
l The SuperServer 6012L-6 weighs approximately 39 lbs (17.7 kg)
when fully loaded. When lifting the system, two people at either
end should lift slowly with their feet spread out to distribute the
weight. Always keep your back straight and lift with your legs.
l Place the chassis top cover and any system components that have
been removed away from the system or on a table so that they
won't accidentally be stepped on.
l While working on the system, do not wear loose clothing such as
neckties and unbuttoned shirt sleeves, which can come into contact
with electrical circuits or be pulled into a cooling fan.
l Remove any jewelry or metal objects from your body, which are
excellent metal conductors that can create short circuits and harm
you if they come into contact with printed circuit boards or areas
where power is present.
l After accessing the inside of the system, close the system back up
and secure it to the rack unit with the retention screws after
ensuring that all connections have been made.
!
l The power supply power cord must include a grounding plug and
must be plugged into grounded electrical outlets.
l Motherboard Battery: CAUTION - There is a danger of explosion if
the onboard battery is installed upside down, which will reverse its
polarities. On the P4DLR+, the positive side should be facing up.
This battery must be replaced only with the same or an equivalent
type recommended by the manufacturer. Dispose of used batteries
according to the manufacturer's instructions.