Filter
Top Products
5-16
SUPERSERVER 6012L-6 User’s Manual
Sleep Button
The header designated J10 (near
the BIOS chip) allows you to con-
nect a push button to the
motherboard that will put the sys-
tem in a suspend mode (S1) when
depressed.
Pin
Number
1
2
3
Definition
+5V Standby
Ground
Wake-up
Wake-On-LAN Pin
Definitions (WOL)
Wake-On-LAN
The Wake-On-LAN header is des-
ignated as WOL. See the table on
the right for pin definitions. You
must enable the LAN Wake-Up set-
ting in BIOS and also have a LAN
card with a Wake-on-LAN connec-
tor and cable to use this feature.
Third Power Supply Fail
Header
The JP46 header with the proper
cable attached can provide warn-
ing of power supply failure. The
warning signal is passed through
the PWR_LED pin on JF1 to pro-
vide indication of a power failure
on the chassis.
Note: This feature is only avail-
able when three using Supermicro
power supplies and so does not
apply to the 6012L-6 server. See
the table on the right for pin defini-
tions.
Third Power Supply Fail Header
Pin Definitions (JP46)
Pin
Number
1
2
3
4
Definition
P/S 1 Fail Signal
P/S 2 Fail Signal
P/S 3 Fail Signal
Reset (from MB)