Swann SW242-4SN DVR User Manual


 
12
6.11 Hard Drive Setup
This section will display the current hard drive status and usage options
HDD SIZE: indicates the total capacity of the hard drive installed in the DVR
HDD USED: indicates the space used in the hard disk drive for recording and
the percentage used
HDD FORMAT: will erase all video and data on the installed hard drive and
make it readable by the DVR
Note: You will be prompted for the password when formatting a hard drive.
The default password is “111111”
6.12 Miscellaneous Setup - Change Password
Area Selection:
Press , , or button to select a
block, and press [SEL] button to set the block to
detect motion, The area is detectable when it is
clear, the area is not detectable when it is covert
by shadow.
OVERWRITE ENABLED:
ON: overwrite oldest video when hard drive is
full.
OFF: stop recording when hard drive is full.
This option allows you to change the
system password. The password must be
composed with six characters.
All keys can be used as password key
except the [MENU] key, which is used to
exit.