Swann SW242-4SN DVR User Manual


 
14
6.15 Miscellaneous Setup - Audio Port Setup
6.16 Miscellaneous Setup - PTZ Setup
Press [SEL] to select the camera, press or button to assign the ID.
6.17 Miscellaneous Setup - Auto Record
For 4-channel DVR, there are 2 audio
inputs. For 9-channel DVR, there is 1 audio
input. You can select the audio recording
function to ON or OFF, and select the video
channel that you like to record the audio on.
SPEED: Set the baud rate (4800 9600
19200 38400) match to your speed dome.
PROTOCOL: Supports “PELCO-D” and
“PELCO-P”. Select the protocol according to
your speed dome’s protocol.
CAMERA: select the camera channel which
is connected with the speed dome.
ID: Assign an ID to your speed dome.
When the function is turned “ON”, the
DVR will automatically begin recording.
When you choose “OFF”, DVR will not
record until you press the [] record button.