Swann SW242-LPN DVR User Manual


 
- 10 -
User’s Manual
5.13 Hard Disk Set
HDD SIZE:
Indicates the total capacity of the hard drive installed in the DVR.
HDD USED:
Indicates the space used in the hard drive and the percentage of hard drive space
being used.
HDD FORMAT:
If you format the hard drive, it will erase all the data in the hard drive.
You need to input your password when you want to format the HDD.
Note: When you install a new hard drive in the DVR, please use this function to
format the hard drive.
5.14 Motion Set
Configure syste
m
date and time:
[
Up] and [ Down]: move the cursor
[ SEL]: modify the value
[
Menu]: exit and save
OVERWRITE ENABLED:
If you choose “YES”, recording
continues and overwrites previous
recordings when the hard drive is full.
If you choose “NO", the
recording process will stop when the
hard drive is full.
MOTION RECORD TIME:
This number indicates how many
seconds the motion detection recording
lasts after the DVR has been triggered by
motion.
TIME SET
2008/08/08 20:08:08
PRESS (UP,DOWN), ENTER (SELECT)
PRESS (MENU) TO EXIT
HARD DISK SET
OVERWRITE ENABLED [YES]
HDD SIZE 120042MB
HDD USED 80865MB 77%
HDD FORMAT
PRESS (UP, DOWN), ENTER (SELECT)
PRESS (MENU) TO EXIT