Swann SW242-LPN DVR User Manual


 
- 6 -
User’s Manual
5.2 Camera Select
If a channel is disabled, the system will display “OFF” on the monitor,
meanwhile, this channel won’t be selected to record. (Refer to 5.3 Record Select)
5.3 Record Select
Configure which channel is allowed to record.
Note: If no channels are selected, an error message will appear briefly on the
screen when record is selected.
The DVR system can display 4
cameras feed in one picture (Quad Mode).
You can configure which camera is
displayed.
Press [
SEL] to modify setting, or
press [CH1], [CH2], [CH3] and [CH4] to
set each channel separately.
[ Menu]: enter system menu
[
Up] and [ Down]: move the cursor
[
SEL]: select/modify settings
[
Menu]: press again to exit
MAIN MENU
CAMERA SELECT 1234
RECORD SELECT 1234
RESOLUTION EACH
RECORD FRAME 25
RECORD QUALITY HIGH
SCHEDULE SET
MISCELLANEOUS MENU
HARD DISK SET
MOTION SET
VIDEO MODE PAL
FACTORY RESET
PRESS (UP DOWN), ENTER (SELECT)
PRESS (MENU) TO EXIT