Filter
Top Products
TANDBERG 6000 MXP Profile
166
number into an IP-address, see H.323 Settings for more information about
gatekeepers.
Select ISDN to ensure that the call is set up as an ISDN call.
Select H.323 to ensure that the call is set up as an H.323 call.
Select SIP to ensure that the call is set up as an SIP call.
Bandwidth
Bandwidth decides the quality of the video picture.
When set to Auto the system will establish a connection using a proper
bandwidth for the call, typically 384kbps for ISDN calls and 768kbps for IP
calls.
When set to Max the system will set up the call with maximum bandwidth
depending on the selected network.
Overview*
Auto: 384 kbps on ISDN/768 kbps on LAN
Max: 768 kbps on ISDN-BRI
1472/1920 kbps (23/30Ch) on ISDN-PRI (T1/E1)
4Mbps(4096 kbps, IP only)
4096 kbps = 4 Mbps, IP only
3072 kbps = 3 Mbps, IP only
2560 kbps = 2,5 Mbps, IP only
1920 kbps = 2 Mbps, 30B
1472 kbps = 23B
1152 kbps = 18B
768 kbps = 12B
512 kbps = 8B
384 kbps = 6B
320 kbps = 5B
256 kbps = 4B
192 kbps = 3B
128 kbps = 2B, Bonding/H.221
64 kbps = 1B, H.221
H0 = 1xH0, 384 kbps, PRI only
* Note that some software versions and networks do not support all channel selections.
Restrict
(56k)
A restricted call uses 56kbps channels rather then the default unrestricted
64kbps channels.
Some older networks (primarily in the USA) do not support 64kbps channels
and require the use of restricted 56kbps calls. By default the system will dial
an unrestricted call and downspeed to 56kbps if necessary.
To force a restricted call, choose Restrict (56k) On.