Tascam DV-D6500 DVD Player User Manual


 
Basic operations
14
Basic operations
English
Basic playback
This section describes basic operations for playback of DVD VIDEO, Audio CD, Video CD and SVCD discs. For MP3 and
JPEG disc playback, see the separate chapter on and after pages 39 and 42.
1
Press OPEN/CLOSE to open the disc tray.
2
Place a disc in the tray.
3
Press OPEN/CLOSE to close the disc tray.
The unit reads the disc information and the
opening display appears on the TV screen.
If a menu is shown on the TV screen
When inserting a DVD VIDEO, Video CD or SVCD disc,
a menu display may be automatically shown on the
TV screen. From a menu, you can select a desired
item to be played back by following the procedure
below.
(for DVD VIDEO)
1
Use
§
/
/
Ó
/
Á
to select a desired item.
2
Press ENTER.
The unit starts playback of the selected item.
(for Video CD/SVCD)
1
Use the numeric buttons to select a desired item.
The unit starts playback of the selected item.
Inserting and removing discs
π
Á
ª
OPEN/CLOSE
OPEN/CLOSE
Disc tray
With the label side up
•To insert an 8-cm disc,
place it in the inner
recess.
NOTES
Do not load a non-playable disc. For details about playable and non-playable disc types, see page 4.
When loading a disc on the tray, be sure to position the disc inside the recess. Otherwise, the disc may be damaged when the
tray is closed, or the disc may not be removed from the unit.
Do not use any stabilizer when playing back a disc.
With some DVD VIDEO discs, the unit starts playback automatically after inserting the disc.
If you insert a DVD VIDEO disc whose region code does not match the unit, "REGION CODE ERROR!" is shown in the opening
display. For detail about the region code, see page 4.