Filter
Top Products
English - 20 -
NOTES
POWER: The receiver should be plugged into a 220-
240 V AC 50Hz supply only.
LEADS: Ensure the power supply lead, and all other
leads, are positioned so they are not likely to be
walked on or pinched by things placed on or against
them. Pay particular attention to the power lead, where
it enters the mains plug and where it comes out of the
receiver. Do not connect or adjust leads when the
receiver is plugged in.
TEMPERATURE AND MOISTURE: Do not leave or
use the receiver in a hot, cold or humid area. Do not
allow the receiver to get wet - from drips or splashes
- as this may be dangerous. Do not place water-fi lled
objects such as fl ower vases, on top of the receiver.
VENTILATION: Slots and openings in the receiver’s
cover are for ventilation. Do not cover or block them
as this could lead to overheating.
CLEANING: Unplug the receiver before it is cleaned.
Use a lightly dampened cloth only. Do not use liquid
or aerosol cleaners.
HEAT AND FLAMES: The receiver should not be
placed near to naked fl ames or sources of intense
heat, such as an electric fi re. Ensure that no naked
fl ames sources, such as lighted candles, are placed
on top of the Receiver.
LIGHTNING: Unplug your receiver from the wall
socket if there is a storm or lightning, or if it is to be
unused for a long time.
REPLACEMENT PARTS: If your receiver needs a
replacement part, ensure the person undertaking
the repair uses parts which are specifi ed by the
manufacturer or have the same specifi cations as the
original part. Other parts may cause a fi re, electric
shock or other hazards.
BATTERY DISPOSAL: Please ensure that exhausted
batteries from the remote control handset are
disposed of safely.
SERVICING: Ensure the person who services your
receiver is qualifi ed to do so. Do not remove the
cover yourself you could get an electricshock.We
are proud to offer a high-quality product. To keep this
level of quality, your receiver should be serviced at
an authorised service centre.