Filter
Top Products
English - 13 -
General Operation
Press the SOURCE button on the remote control
and select DTV/USB to switch the TV set to digital
terrestrial television broadcasting.
Information Banner
• Whenever you change channel, using the P- / P+
button or the numeric buttons, the TV displays the
broadcast picture along with an information banner
at the bottom of the screen (available only in DTV
mode). This will remain on the screen
for a few
seconds.
• The information banner can also be displayed at any
time while watching TV by pressing the
INFO button
on the remote control:
Hint: Not all channels broadcast the programme
data. If the name and time of the programme are not
available, then information banner will be displayed
with blanks.
If the selected channel is locked, you must enter the
correct four numeric code to view the channel. “Enter
PIN” will be displayed on the screen in such a case:
Electronic Programme Guide
(EPG)
• Some, but not all, channels send information about
the current and next events.
• Please note that event information is updated
automatically.
If there is no event information data
available in channels, EPG will be displayed with
blanks.
• Press EPG button to view the EPG menu.
• Electronic Programme Guide appears on the screen.
It is able to get Information of the channel - programs
weekly by means of 7-DAY-EPG. All programs of
channels are displayed. On the bottom of the screen;
info bar, showing all the available commands, will
be displayed.
RED button (Shrink) : makes the info boxes
smaller.
GREEN button (Expand) : makes the info boxes
larger.
YELLOW button (Prev. Day) : displays the
programmes of previous day.
BLUE button (Next day) : displays the programmes
of the next day.
INFO (Details): displays
the programmes in detail.
Numeric buttons (Jump) : go to preferred channel
directly via numeric buttons.
OK : views options for future programmes.
SWAP : jumps to the current boradcast.
• Press “0” button
on the remote control to view Guide
Search menu. Using this feature, you can search the
programme guide database.
Displaying Subtitles
Press the “ MENU ” button to display the main menu,
highlight the Setup and then Language menu using
“ ” or “ ” button and press the OK button to display
the “Language settings” menu.
Highlight the “Subtitle” item in “Language settings”
menu and use
” or “ button to set Subtitle to the
desired language.
If “Subtitle” is on and a language option is set, pressing
the
button causes the following warning message
display on the screen (** for UK only):
Digital Teletext (** for UK only)
• Press the button.
• The digital teletext information appears.
• Operate it with the coloured buttons, cursor buttons
and OK button.
[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10065841.indd 13[GB]_MB25_(01-TV)_COST_1900UK_PEUIDTV_22855W_NICKEL5_10065841.indd 13 02.11.2009 15:00:1002.11.2009 15:00:10