Filter
Top Products
EN
12
Adjusting the sound
Display the OVERVIEW menu by pressing the MENU button. Select the Sound option
and press
OK to confirm.The SOUND menu appears with the following options:
Sound settings: see further below.
Sound type: select a sound type from the list using the buttons.
The default sound type is
Automatic for mono sources, Stereo for stereo sources and
Stereo for AV sources.
Note:The options offered depend on the programme you’re watching. Refer to the table1
opposite.
Sound mode:The options available depend on the sound type selected (refer to table 2
opposite).
Default mode for mono sources is
Normal and Virtual Dolby PLII for stereo
sources.
SRS Mode: the options available depend on the mode selected (refer to table 3 opposite)
Using the buttons, select an option from the list:
SRS TruSurroundXT:reproduces virtually via two channels only the sound of a
multichannel source and enhances the dialogue and bass output.
SRS TruSurround:reproduces virtually via two channels only the sound of a
multichannel source.
SRS TruBass: enhances the bass output.
SRS Dialog Clarity: this function boosts the central channel to make dialogue easier to
understand.You can use the buttons to adjust it.
Note:This option only appears if you have selected Normal or Virtual Dolby PLII under
Sound mode and SRS TruSurroundXT under SRS Mode.
Automatic sound level: check the box by pressing the OK button, if you want to keep
the same sound level for all channels.
Headphone settings: this option allows access to the headphone setting menu (see
further below).
Graphic equaliser: this option allows access to the graphic equaliser (see further
below).
Press
EXIT to close the menu. Select Return and press OK to return to the
OVERVIEW menu.
Configuring the sound settings
You can configure the sound environment according to the loudspeakers you connect to
the TV set.
Select the
Sound settings option from the Sound menu and press OK to confirm.The
options are the following:
Left/Right balance: balance the sound between the left and right speakers.
Left/Right speakers: select External if you have connected external side speakers
(see page 24),
Internal if you have not. Otherwise, there would be no sound.
Subwoofer: select None, if you do not want to use a subwoofer; Internal, if you are
using the television’s subwoofer;
External, if you have connected an external subwoofer.
Note:The Internal option is only available if the television has a subwoofer.
Press EXIT to close the menu.To return to the Sound menu, select Return and press
OK to confirm.
Headphone settings
Select the Headphone settings option from the Sound menu and press OK to
display the menu.Then select each option in turn, using the buttons to adjust the
volume, bass and treble level and select the sound type.
Press EXIT to close the menu.To return to the Sound menu, select Return and press
OK to confirm.
Chapter 4 Advanced functions
Return
❿❿
Headphone volume
Headphone bass
Headphone treble
Headphone sound Stereo...
HP set
Return
Sound settings ...
Sound type Stereo...
Sound mode Dolby Virtual...
SRS Mode SRS TruSurround...
SRS Dialog Clarity
❿❿
Automatic sound level
Headphone settings ...
Graphic equaliser ...
Sound
Return
❿❿
Left/Right balance
Left/Right speakers External...
Subwoofer External...
Broadcast
Mono
Stereo
Dual
NICAM - 3
Analog AV
Options
Automatic - Mono
Mono - Stereo
Sound 1 - Sound 2
Sound 1 - Sound 2 - Sound 3
Stereo - Sound 1 - Sound 2
Sound type
Mono
Stereo
Sound 1
Sound 2
Options
Normal - Wide
Normal - Virtual Dolby PLII
Normal - Wide
Normal - Wide
Set
2
1
Sound mode
Normal*
Wide
Virtual Dolby PLII
Options
SRS TruSurroundXT
SRS TruSurround
SRS TruBass - Off
SRS TruBass - Off
SRS TruSurroundXT
SRS TruSurround
3
* Only the options SRS TruBass and Off are
available for mono sources.
itc250-en 6/04/04 11:57 Page 12