Filter
Top Products
Advanced functions
EN
21
Other Teletext functions
Newsflash
When a newsflash is detected, the icon is replaced with a N in the navigator. Select it
and press
OK to display the newsflash. In the case of an update, the Teletext function is
enabled and displays the new information.
Subtitles
Some channels provide subtitles for some of their programmes.The number of the relevant
pages is specified on the Teletext index page.
To display subtitles, enable the Teletext function, find the number of the page displaying the
subtitles and enter it. Once the relevant page is found, the subtitles appear in the TV
picture.The navigator disappears after a couple of seconds.To display it again, press the
purple (
TEXT) button.
Alarm page
In some countries (Spain, Benelux, etc.), you can set a time to display certain Teletext pages
(alarm pages).
To do this, display the relevant alarm page and enter subpage mode. Enter the time instead
of the subpage number (e.g. 1705 for 17:05) and press
EXIT.The page will disappear and
will appear again at the set time, as long as you do not change channels or switch off the TV
beforehand.
Direct access
The yellow and blue buttons on the remote control allow you to access directly those
pages whose numbers are displayed in yellow and blue at the bottom of the screen.
Fastext
Fastext displays a bar at the bottom of the page divided into four coloured sections (red,
green, yellow and blue), which provide links to the topics you can access by pressing the
relevant colour button. Other topics accessible in the same way can also be displayed.
TOPtext
TOPtext displays a bar at the bottom of the page divided into two coloured sections
(yellow and blue).The blue section displays a topic you can access directly by pressing the
blue button.The next topic will then appear in the blue section.
The yellow section displays an article you can access directly by pressing the yellow button.
The next article will then appear in the yellow section.
Storing the programme page
If the broadcasting company changes its Teletext pages, you have to store the new
programme page to be able to access the programme guide (see page 22).
To do this, display the current programme page and select the symbol. Press the OK
button until the message “Store for Program Info: OK. Cancel: 0” appears at the
bottom of the screen. Press
OK.Press EXIT to quit Teletext and display the programme
guide.This should appear within a few moments.
itc250-en 6/04/04 11:57 Page 21