Filter
Top Products
EN
24
Chapter 5 Other information
Sockets
AV1 and AV2 SCART sockets (input-output) at the back.
These sockets can be used to connect a range of equipment, including video recorders,
camcorders (VHS, S-VHS, 8 mm or Hi 8),decoders, satellite receivers, DVD players, games
consoles or devices producing an RGB signal.
AV3 SCART socket (input) at the back.
This socket can be used to connect equipment, such as video recorders or camcorders
(VHS, S-VHS, 8 mm or Hi 8).
AV4 CINCH audio and video component (synchroscan)
sockets (input) at the back.
These can be used to connect a DVD player.The component sockets automatically detect
the type of component signal received: interlaced component (Y/Pr/Pb) or progressive
component (Y/Cr/Cb).The supported formats are:
480i, 60Hz 576i, 50 Hz 1080i, 60 Hz 720p, 50 Hz
480p, 60 Hz 576p, 50 Hz 1080i, 50 Hz (31.25 kHz) 720p,60 Hz
1080i, 50 Hz (28.125 kHz)
AV5 CINCH audio and DVI sockets (input) at the back.
These sockets can be used to connect a PC with a compatible graphics card, certain DVD
players or a compatible high-definition digital satellite decoder.The DVI socket automatically
detects whether a signal is received when you select the AV5 programme.The supported
formats are:
640 x 480p, 60 Hz, 16:9 1280 x 720p, 60Hz, 16:9
720 x 480p, 59,94 Hz, 16:9 1280 x 720p, 50Hz, 16:9
720 x 576p, 50 Hz, 16:9 (31.25 kHz) 1920 x 1080i, 60 Hz, 16:9 (33.75 kHz)
1080i, 50 Hz (28.125 kHz) 1920 x 1080i, 50 Hz, 16:9 (31.25 kHz)
Audio CINCH sockets (output) at the back.
These can be used to connect a stereo amplifier, a hi-fi system or amplified speakers (see
below).
AV3 audio and video CINCH sockets (input) at the front
or side.
These can be mainly used to connect camcorders (VHS or 8 mm format).
S socket and AV3 audio CINCH sockets (input) at the
front or side.
These can be mainly used to connect camcorders (S-VHS or Hi 8 format).
To display images using the equipment connected, press the
AV button on the remote
control: once to select AV1, twice to select AV2 and three times to select AV3. For some
equipment (connected to the SCART sockets),this selection is done automatically.
Connecting headphones
Use the relevant socket on the front of the TV set to connect headphones or stereo
earphones. Refer to page 12 on how to adjust the headphone volume.
Connecting active speakers
The audio CINCH sockets at the back of the television can be used to connect active
speakers (with a built-in amplifier) replacing the television’s built-in speakers.
Left and right speakers: connect the left speaker to the CINCH L socket and the right
speaker to the CINCH R socket.
Subwoofer: connect the subwoofer to the SUB-WFR socket.
AV3
AV2
AV1
L. R.
AUDIO
VIDEO
S
R
L
Y
Pb
Pr
R
L
SUB-WFR
R
L
itc250-en 6/04/04 11:57 Page 24