Filter
Top Products
7
GB
7
Daily use
How to switch on the set?
With the On/Off-button fitted on the set. When the
red LED is lit, the TV set has previously been
switched on standby with the key
BB
on the remote
control.
If the red LED flashes, it means that the control
keyboard of the TV is locked and can only be made
operational again through the remote control.
In both cases, enter a channel number.
How to select a channel?
a) Through the digital keys of the remote control.
For the 2-digit channels (10, 11, 12, etc.) press on
key 0 of the remote control.
" --" appears on the screen. Through the digital
keys, enter the tens unit digit, then the unit one.
b) With key pr+ or pr-.
How to select the Sound channel?
This function may only be accessed if you selected
Auto on the line of the Sound menu (see p. 6).
Press the blue key to successively select S1, S2 or S3
during NICAM, Stereo or Dual telecasts, or when
using a device connected to one of the AV
connections.
How to adjust the volume?
With the ( ) or ( ) key.
How to mute the sound?
With the ( ) key.
Press once more on the key to reactivate the sound.
How to display the channel number?
With the info key, display or remove the channel
number and, if you want it, the time left before timer-
programmed switch-off.
How to recall the preferred settings?
Press on the red key to recall the sound and picture
settings you previously stored (see page 6).
How to programme a switch-off?
Press on the Green key, then using the Left/Right
keys, adjust on the screen the wished-for duration
before the switching-off of the TV set (by intervals of
10 minutes up to 4 hours).
To exit the menu, press exit.
When the programmed remaining time is over, the
TV set will switch on standby.
30 seconds before automatic cut-off, a message
appears on the screen.
To cancel, first press the Green key and then, by
means of the directional key Left, reset the time
remaining on -:--.
The programmed switching-off is also deactivated
when the TV set is turned off through its own On/Off
switch.
How to prevent kids using the TV set?
Hold key
BB
on the remote control down for over 4
seconds until the red LED on the TV set flashes.
The keys of the TV set are now locked and switching
it on again will be possible by means of the remote
control only.
Keep the remote control out of the reach of children.
To unlock the keys of the TV set, make use of the
number keys on the remote control.
The keys of the TV set will also remain locked after
timer-programmed switching-off.
The lock function will also be activated when the TV
set is switched on standby or switched off with its
On/Off switch before the time remaining until
programmed switching-off is over.
How to switch off the set?
To switch the TV set off, press the key
BB
on the
remote control or use the On/Off switch on the TV
set.
The TV set automatically switches to stand-by after a
few minutes without telecast on the selected channel.
tx807en1 4/02/00 11:05 Page 7