Filter
Top Products
Controlling the rest of your system11
50
En
1 While pressing the RECEIVER button,
press the
SETUP
button.
The remote LCD display shows
SETUP
.
2 Use
/
to select
DIRECT F
then press
ENTER
.
3 Press the MULTI CONTROL button for the
component you want to control
then press
ENTER
.
The LCD on the remote displays the
component you want to control.
4 Use
/
to switch direct function ON or
OFF then press
ENTER
.
The LCD shows
OK
to confirm the setting.
5 Press and hold RECEIVER for about two
seconds to exit the SETUP.
Confirming preset codes
Use this feature to check which preset code is
assigned to a
MULTI CONTROL
button.
1 While pressing the RECEIVER button,
press the
SETUP
button.
The remote LCD display shows
SETUP
.
2 Use
/
to select READ ID then press
ENTER
.
3 Press the MULTI CONTROL button of the
component for which you want to check the
preset code then press
ENTER
.
The brand name and preset code appears in
the display for three seconds.
Controls for TVs
This remote control can control components after entering the proper codes or teaching the
receiver the commands (see
Operating other Pioneer components
on page 48 for more on this).
Use the
MULTI CONTROL
buttons to select the component.
• The
TV CONTROL
buttons on the remote control are dedicated to control the TV assigned to
the
TV CTRL
button. If you have two TVs, assign the main TV to the
TV CTRL
button.
Button(s) Function Components
TV
Switches the DTV on or off. DTV
Switches the TV or CATV between standby and on. Cable TV/Satellite TV/TV
INPUT
SELECT
Switches the TV input. (Not possib
le with all models.)
TV
TV CH +/–
Selects channels. Cable TV/Satellite TV/TV/
DTV
TV VOL +/–
Adjust the TV volume. Cable TV/Satellite TV/TV/
DTV
SOURCE
Press to switch the component assigned to the
TV CTRL
button on or off.
Cable TV/Satellite TV/TV/
DTV
Switches the DTV on or off. DTV
Press to get information on DTV programs. DTV
Use to choose the BLUE commands on a DTV menu. DTV
VSX_816.book.fm 50 ページ ２００６年２月２０日 月曜日 午後２時１４分