Filter
Top Products
INSTALLATION (Connection)
INSTALLATION
1-3) Connection to the other A/V equipment with
the CINCH Cable.
Connect one end (3 connectors) of the CINCH
cable to the AUDIO-RIGHT-IN (red), AUDIO-
LEFT-IN (white) and the VIDEO INPUT
(yellow) socket on the STB.
Connect the other end (3 connectors) to the
AUDIO-RIGHT (red), AUDIO-LEFT
(white) and the VIDEO OUTPUT socket
on the A/V equipment. Then STB may bypass
the A/V signals of the A/V equipment in the
case of stanby mode of STB.
2) Connection to the other Satellite
Receiver.
Connect the satellite cable to the LNB IN
socket on the STB. With a connector, connect
the LNB OUT socket on the STB and the
ANT IN socket of the other STB.