Filter
Top Products
MENUOPERATIONS
. Motor Control
- Goto: Moves the motor to the stored position of the selected satellite.
- Store : Stores the current position of the motor for the selected satellite.
- Reset: Resets all stored position of the motor relative to the “0” position.
(Installermode only)
- Recalculate: Recalculates the position of the Stab Rotor motor.
- Limit E,W: Limits east and west position.
- Limit OFF: Setting of the limitation.
- Goto Ref: Goes to reference.
. Channel Search: After saving the DiSEqC configuration at the highest signal strength,
press button to start channel searching of the selected satellite.
IV-4. SAT/Tp Edit
MENU OPERATIONS