Filter
Top Products
MENU OPERATIONS
IV-3 . Motorized DiSEqC 1.2
If you have DiSEqC 1.2 motorised system, then you can use the DiSEqC 1.2 functions.
. Satellite Name
A selection of satellite names that will be used to identify a motor position.
. Frequency: Selects the frequency to catch the strong signal.
. DiSEqC Command Mode : Change the current mode between Userand Installer
modes.
- User: This mode is used to fine-tune the position of the motor for better reception.
- Installer: This mode is used to search for the position of a satellite manually.
. Movement: In case of Usermode, the movement is adjustable by fine-tuning.
In case of Installermode, the movement is adjustable by East,Westgoing
command.
MENU OPERATIONS