Filter
Top Products
3)
2)
4)
5)
Position dish : Press the button to search and allocate the antenna to the adequate
position. The positioning procedure might not succeed the first time. Repeat the
procedure, if it is needed. As you press the / buttons, the cursor will subsequently
move to the left/right until it finds the matching position. As soon as the cursor finds
the position, the quality signal (yellow bar) will appear.
Align dish : In the position, peak the dish to obtain the highest signal quality using
the or buttons.
. Press the red (F1) button to save it!
Channel Search : Select Start Search...to store all channels.
NOTE: There could be an error, though rare, concerning the misplacement of east
and west positions. Please check the position of the Antenna Positioner for the
best solution.
Frequency : Press the button to display the frequency list. Any frequency will
function. Please contact the installer or the service provider for more specific
information.
Positioner Setting Guide Positioner model only
POSITIONERSETTINGGUIDE
E. Initialize Position Data
F. Moving Confirmaton Box
You can initialize all stored position data
when you want set up new satellite position.
If this item is set to Off, you need not confirm the moving when channel is changed to
other satellite.
If this item is set to On, you have to confirm the moving antenna position when
channel is changed to other satellite.