Filter
Top Products
3-2) Connection to an actuated dish with
C/Ku switch .
Connect the cables from C and ku-band
LNB to 12 Volt C/Ku switch.
Connect the coaxial cable from the
0/12 Volt switch to LNB IN connector.
Connect the power cable which comes
from the 0/12 Volt switch to the 0/12V
connector.
Connect motor wires to M1 and M2.
Switch these connections if the motor
moves to the wrong direction.
Connect sensor wires to PULSE and GND connectors.
Connect a mechanical polarotor to +5V,GND and SKEW connectors.
INSTALLATION
INSTALLATION (Connection) Positioner model only
3. Connection to the dish. (Positioner model only)
3-1) Connection to an actuated dish
Connect the LNB IN socket of the STB
to the LNB.
Connect motor wires to M1 and M2.
Switch these connections if the motor
moves to the wrong direction.
Connect sensor wires to PULSE and
GND connector.
Connect a mechanical polarotor to +5V,
GND and SKEW connectors.
Improper connetion cause malfunction or may break down your STB and Motor