Filter
Top Products
66 Accessing to The Digital Receiver via The Internet
8.2 Configuring the wireless network settings on the digital
receiver
You should configure the WLAN settings to enable the web
service and FTP service. You had better refer to the manual of
your router for understanding of technical terminology.
NOTE
Your router should be within five meters of the digital receiver.
IP configuration
Select the Installation
>
LAN Set-
ting > IP Configuration menu.
You may assign a dynamic IP ad-
dress to the digital receiver. To
do so, set the DHCP option to
On. You can view the dynamic
IP address assigned to the digi-
tal receiver by your router at the
WLAN Status menu.
Whenever the digital receiver is restarted, the dynamic IP ad-
dress will be changed and you will have to check it at the
WLAN Status menu to access the digital receiver. To avoid this
cumbersome thing, you had better assign a static IP address
rather than dynamic one.
Set the DHCP option to Off, then the IP Address, Subnet Mask
and Gateway options become enabled. You have to set these
options to match the configuration of your router.
Set the User ID and Password options as you desire. When you
access the FTP server, you will be asked for the account that is
made with these options