10
Overview of steps for installing,
setting up, and using your new TV
Follow these steps to set up your TV and begin using
its many exciting features.
1
Carefully read the important safety, installation,
care, and service information. Keep this manual
for future reference.
2
Observe the following when choosing a location
for the TV:
•
Read “Important notes about your LCD TV”
( page 7).
•
Place the TV on the floor or a sturdy, level,
stable surface that can support the weight of the
unit. Secure the TV to a wall, pillar, or other
immovable structure ( page 4).
•
Place the TV in a location where light does not
reflect on the screen.
•
Place the TV far enough from walls and other
objects to allow proper ventilation. Inadequate
ventilation may cause overheating, which will
damage the TV. THIS TYPE OF DAMAGE
IS NOT COVERED UNDER THE TOSHIBA
WARRANTY.
3
Do not plug in any power cords until AFTER you
have connected all cables and devices to your TV.
4
BEFORE connecting cables or devices to the TV,
learn the functions of the TV’s connections and
controls ( pages 11–12).
5
Connect your other electronic device(s) to the TV
( pages 13–19).
6
Install the batteries in the remote control ( page
20).
7
See “Learning about the remote control” ( page
21) for an overview of the buttons on the remote
control.
8
AFTER connecting all cables and devices, plug
in the power cords for your TV and other devices.
Then press POWER on the TV control panel or
remote control to turn on the TV. If the TV stops
responding to the remote control or TV control
panel and you cannot turn the TV off or on,
please unplug the power cord a few seconds then
plug it back in and try again.
9
See “Menu layout and navigation” for a quick
overview of navigating the TV’s menu system
( page 22).
10 Program channels into the TV’s channel memory
( page 24).
11 For details on using the TV’s features, see
Chapters 6 and 7.
12 For help, refer to Chapter 8: Troubleshooting.
13 For technical specifications and warranty
information, see Chapter 9.
14 Enjoy your new TV!