Filter
Top Products
58
LV1737 (E/F) Web 213:276
Chapter 7: Using the TV’s advanced features
Selecting the color temperature
You can change the quality of the picture by selecting from
three preset color temperatures (Cool, Medium, and Warm), as
described below.
To select the color temperature:
1 Press Y and open the Video menu.
2 Highlight Picture Settings and press T.
3 Highlight Advanced Picture Settings and press T.
4 Highlight Color Temperature and press T.
5 In the Color Temperature field, select the mode you
prefer (Cool, Medium, or Warm).
6 Press B or b to select either B Drive or G Drive, and
then press C or c to adjust the settings.
• B Drive: c makes the picture blueish.
• G Drive: c makes the picture greenish.
Note: The B Drive and G Drive settings are connected to
the Color Temperature settings and will change based
on which setting is selected in step 5 above.
7 To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Note: If you select one of the factory-set picture modes
(Sports, Standard, or Movie) and then change the color
temperature mode, the picture mode automatically
changes to Preference.
Using CableClear
®
digital noise reduction
The CableClear
®
digital noise reduction feature allows you to
reduce visible interference in your TV picture. This may be
useful when receiving a broadcast with a weak signal
(especially a Cable channel) or playing a noisy video cassette
or disc.
To change the CableClear settings:
1 Press Y and open the Video menu.
2 Highlight Noise Reduction and press T.
3 In the CableClear field, select your desired setting.
Note:
• If the current input is ANT, VIDEO 1, or VIDEO 2, the
menu will display the text “CableClear.” The available
selections are Off, Auto, Low, Middle, and High.
• If the current input is ColorStream HD1, ColorStream
HD2, HDMI 1, HDMI 2, or HDMI 3 the menu will display
the text “DNR.” The available selections are Off, Auto,
Low, Middle, and High. Auto will react proportionally
to the strength of the noise. Low, Middle, and High will
reduce the noise in varying degrees, from lowest to
highest, respectively.
4 To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Mode Picture Quality
Cool blueish
Medium neutral
Warm reddish
Done
Advanced Picture Settings Mode: Preference
Static Gamma
Reset
Dynamic Contrast
High
Cool
Color Temperature
0
Done
Color Temperature Mode: Preference
B Drive
Reset
Color Temperature
Cool
G Drive
0
0
B Drive
1
G Drive
1
Mode
Picture Settings
Noise Reduction
Video
Game Mode
Theater Settings
Off
Sports
Done
Noise Reduction ANT
Reset
CableClear
Auto
Low
MPEG Noise Reduction
32LV1737_EN.book Page 58 Monday, April 23, 2007 1:54 PM