Filter
Top Products
Again, from the FEATURE MENU select AV
connection
.
Using the
S
or
R
buttons change the EXT2 output
option to either Monitor, TV, EXT1 or EXT3.
Monitor = The picture on screen
TV = The last television programme selection.
EXT1 or 3 = the picture from equipment
connected to Scart 1 or Scart 3.
AV CONNECTION
▼▼
▼
▼
▼▼▼
▼ ▼▼
▼
Back
Digital input-1
EXT4
Digital input-2
EXT3
EXT2 input
AV
EXT3 input
S-VIDEO
EXT2 output EXT 1
22
ADDITIONAL FEATURES
AV connections and input selection
2
1
Selecting the OUTPUT signal for Scart 2
SELECTING THE DIGITAL AUDIO SIGNAL
2
1
▼
▼
▼▼
▼
▼
▼▼
▼▼
Back
Digital input-1
EXT4
Digital input-2
EXT3
EXT2 input
AV
EXT3 input
S-VIDEO
EXT2 output EXT 1
▼
AV CONNECTION
▼▼▼
▼
▼
▼▼▼
▼▼▼
▼
Back
Digital input-1
EXT4
Digital input-2
EXT3
EXT2 input
AV
EXT3 input
S-VIDEO
EXT2 output EXT 1
Defining your INPUT and OUTPUT sockets so that your television recognises connected
equipment.
P
P
This feature allows you to specifiy the type of signal going
into Scarts 2 or 3 on the back of the television and the
sockets on the front (Input 3). AV is the most common
and comes from standard video recorders and Set Top
Boxes whereas S-VIDEO signals are
less common. (Please refer to the manufacturer’s
specification.)
SELECTING THE VIDEO SIGNAL
1
From the FEATURE MENU select AV
connection and with the
S
or
R
button select
either AV or S-VIDEO as the required input for
EXT2 and EXT3.
Input Selection
AV CONNECTION
This set is provided with 2 digital audio inputs – DA-1
and DA-2 – so that, for example, a DVD player and a
games console can stay permanently connected.
Having connected the video signal from your DVD to,
say, COMPONENT VIDEO INPUT (EXT4) and from your
games console to Scart 3 (EXT3) you will now need to
connect the audio cables to the inputs on the back of the
set, then match the two up.
This feature enables you to select the source to output
from Scart 2. e.g. If you connect a stereo Set Top Box
to Scart 1 and a stereo video recorder to Scart 2, and
select
EXT1
as the
EXT2
output (i.e. you will output
the signal received through Scart 1 directly out to
Scart 2), you will be able to record the stereo Set Top
Box transmission in stereo.
Most video recorders and Set Top Box receivers send a
signal through the Scart lead to switch the TV to the
correct Input socket. Alternatively you may select it with
the external source selection button
B
on the remote
control. Press
B
repeatedly until you see the picture on
your equipment.
Digital Audio in the display indicated that the external
source has been set as a digital audio input, see below.
An S in the display, e.g. EXT2S, indicates the input is set
for an S-Video signal.
…Please see page 23
for a clear view of the
back connection
recommendations…
If you have connected to DA-1, select AV
connection
from the FEATURE MENU and
press the Q button to highlight Digital Input 1
then with the
S
or
R
buttons, select the appropriate
video input, for example EXT4 for the DVD player.
Then for the 2nd connection, press the Q button to
highlight Digital Input 2 then with the
S
or
R
buttons, select the appropriate video input, for
example, EXT3 for the games console.