Filter
Top Products
11
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
ANT-1 OUT ANT-2
ANT(75 )
S-VIDEO
VIDEO
L/
MONO
AUDIO
R
VIDEO-2VIDEO-1
Y
P
B
P
R
L
Y
P
B
P
R
AUDIO
COLOR
STREAM
HD - 2
COLOR
STREAM
HD - 1
R
L
AUDIO
R
OUT
AUDIO
CENTER
CHANNEL IN
L/
MONO
AUDIO
ON OFF
VIDEO
VAR
AUDIO
L
R
R
IN
IN
L
R
DVI / HDCP
IN
VIDEO
OUT
S-VIDEO
AUDIO
COMPONENT VIDEO
OUT
L
R
L
R
P
RPBY
Satelite IN
IN from ANT
OUT to TV
CH 3
CH 4
VIDEO AUDIO
LR
IN
OUT
DTV receiver with component video
Stereo VCR
From antenna
From DTV antenna
TV
Note:
For the highest possible picture quality, use
component video cables (or a DVI-D digital
single-link cable) between the TV and DTV
receiver/set-top box.
You can connect component video cables to
either ColorStream jack on the TV (HD1
or HD2).
For DVI/HDCP connection, see page 13.
The ColorStream HD1/HD2 and DVI/HDCP
jacks can be used with Progressive (480p,
720p) and Interlaced (480i,1080i) scan
systems; however, a 1080i signal will provide
the best picture performance.
If your DTV receiver or set-top box is not
compatible with component video or
DVI/HDCP, use the S-video connections
(plus the standard audio connections) instead
(see page 9).
To monitor recording, set the TV to VIDEO 1.
The unauthorized recording, use, distribution,
or revision of television programs, videotapes,
DVDs, and other materials is prohibited under
the Copyright Laws of the United States and
other countries, and may subject you to civil
and criminal liability.
Connecting a DTV receiver/set-top box with
ColorStream
®
(component video) and a VCR
This connection allows you to watch DTV (digital TV), VCR, and
TV programs, and record DTV and TV programs.
Your TV has ColorStream (component video) inputs. Connecting
your TV to a DTV receiver/set-top box with component video can
greatly enhance picture quality and realism.
To record and watch a DTV program, select LINE IN on the VCR,
and select ColorStream HD2 (or VIDEO 1 for a non-ColorStream
connection) on the TV (see “Selecting the antenna input” on
page 25).
To record a TV program while watching a DTV program, tune the
VCR to the channel to record, and select ColorStream HD2 on
the TV.
To record and watch the same TV program, tune the VCR to the
channel to record, and select VIDEO 1 on the TV.
To record one TV program while watching another TV program,
tune the VCR to the channel to record, and tune the TV to the
channel to watch.
You will need:
• three coaxial cables
• two sets of standard A/V cables
• one pair of standard audio cables
• one set of component video cables
34HDX82(E)07-14 8/20/02, 3:56 PM11