Filter
Top Products
27
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
Adding and erasing channels manually
After you have automatically programmed all active channels into the
TV’s memory, you can manually add or erase specific channels.
To add or erase channels:
1. Select the channel you want to add or erase. If you are adding a
channel, you must select the channel using the Channel Number
buttons.
2. Press MENU, and then press x or • until the SET UP menu
appears.
3. Press y or z to highlight ADD/ERASE.
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
234567891011 12 13 1415 16 1718 19
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
1234567891011 12 13 1415 16 1718 19
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
SET UP
LANGUAGE
CLOCK
ANT
ADD ADD ERASE/ERASE/
TV
CH
PROGRAM
CABLE/ CABLE
1 ANT1/2
SET
ENGL SHI
00:00
TILT CORRECTION
QUICK CONNECT GUIDE
4. Press x or • to select ADD or ERASE, depending on the
function you want to perform.
5. Repeat steps 1–4 for other channels you want to add or erase.
Changing channels
To change to the next programmed channel:
Press Channel y or z on the TV or remote control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0–9 and 100).
For channels 100 and higher, press the 100 button, and then the
next two numbers. For example, to select channel 125, press
100, 2, 5.
Changing channels using SpeedSurf
To change to a specific programmed channel using SpeedSurf:
Press and hold Channel y or z for about one second. The TV
will enter the SpeedSurf mode.
4 CNN
7 CBS
11 FOX
13 ESPN
16 TBS
While the SpeedSurf mode is on-screen, repeatedly press or hold
Channel y or z to scroll the channel list. Release the button to
display the highlighted channel.
MENU
yzx •
Channel yz
Channel
Number
Upper channels
↑
Current channel
↓
Lower channels
Channel label (if set)
POWER
CHANNELVOLUMEMENU
TV/VIDEO
TV front panel
Channel zyMENU
34HDX82(E)23-28 8/20/02, 3:56 PM27