Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
12
Note:
• For better picture quality, if your camcorder
has S-video, you can use an S-video cable
(plus the standard audio cables) instead of a
standard video cable.
• Do not connect both a standard video cable
and an S-video cable at the same time, or
the picture performance will be
unacceptable.
Note:
• When using an external audio amplifier, if
you set AUDIO OUT to VARIABLE, the
volume of both the TV and amplifier must
be set above 0 (zero) or you will not hear
any sound. See “Selecting fixed/variable
AUDIO OUT” on page 40.
• If you set AUDIO OUT to VARIABLE, the
TV’s volume controls will adjust the volume.
If you set AUDIO OUT to FIXED, you must
use the amplifier’s volume controls
to adjust the volume. See “Selecting
fixed/variable AUDIO OUT” on page 40.
Connecting an audio system
This connection allows you to use an audio amplifier to adjust the
audio level. This connection also allows you to use external speakers.
To control the audio, turn on the TV and the stereo amplifier, and
turn off the built-in speakers. (See“Turning off the built-in speakers”
on page 39.)
You will need:
• one coaxial cable
• one pair of standard audio cables
DEMO MENU TV/VIDEO VOLUME CHANNEL
VIDEO-3 IN
VIDEOS-VIDEO L/MONO-AUDIO-R
VIDEO
AUDIO
OUT
L
R
Connecting a camcorder
This connection allows you to watch videos recorded on a camcorder.
You will need:
• one set of standard A/V cables (see note at right)
Camcorder
TV front panel
LINE IN
LR
ANT
(
75
)
OUT
IN
S-VIDEO
VIDEO
VIDEO 1 VIDEO 2
L/
MONO
AUDIO
R
DVD IN
PR
PB
Y
COLOR
STREAM
INPUT
L
AUDIO
R
L/
MONO
AUDIO
R
VIDEO
VAR/FIX
Amplifier
From Cable,
Cable Box,
or Antenna
TV