Filter
Top Products
18
Using the TV’s features
Selecting the stereo programs
1
When a stereo program is received, d Stereo appears.
2 Press g to select the stereo/monaural mode. d
Stereo and e Mono appear cyclically on the screen.
Selecting the bilingual programs
1
When a bilingual program is received, e Dual appears.
2 Press g to select the sound to be heard. The sound
differs according to the transmission system: NICAM or
German stereo/bilingual broadcast.
Note:
These settings are not stored in the TV memory.
Adjusting the sound quality
1
Press M, then press Y or y to display the SOUND menu.
2 Press < or > to select an item you want to adjust, then
press Y or y to adjust the settings as required.
Using the SRS WOW surround sound
SRS WOW is a special combination of SRS Labs audio
technologies that creates a thrilling surround sound experience
with deep, rich bass from stereo sound sources. Your TV’s
audio will sound fuller, richer and wider.
WOW consists of three features; SRS 3D, FOCUS, and
TruBass, being turned on.
1 From the SOUND menu, press < or > to select WOW
on the 2nd page, then press Q.
2 Press < or > to select an item you want to adjust, then
press Y or y to adjust the settings as required.
SRS 3D: To turn the surround effect On or Off.
FOCUS: To turn the vocal emphasis effect On or Off.
TruBass: To select the desired bass expansion level
(Off, Low or High).
Notes:
• If the broadcast is monaural, the SRS 3D effect does not
work.
• WOW, SRS and l
®
symbol are trademarks of SRS Labs,
Inc.
• WOW technology is incorporated under license from SRS
Labs, Inc.
• The SRS WOW effect is active only when the sound outputs
from the speaker.
Using the stable sound
The Stable sound function limits the highest volume level to
prevent extreme changes in volume when the signal source
changes (for example, to prevent the sudden increase in
volume that often happens when a TV program switches to a
commercial).
1 From the SOUND menu, press < or > to select Stable
sound on the 2nd page.
2 Press Y or y to select On or Off.
Note:
The Stable sound effect is active only when the sound outputs
from the speaker.
Activating the speaker
Use this function to turn the TV speakers off when you connect
an audio system (- page 25).
1 From the SOUND menu, press < or > to select
Speaker on the 2nd page.
2 Press Y or y to select On or Off.
Display
Sound to be heard
NICAM
German stereo/
bilingual broadcast
j Dual 1 Sub I sound Main sound
J Dual 2 Sub II sound Sub sound
e Mono Main sound —
Selection Y Pressing y
Bass weaker stronger
Treble weaker stronger
Balance decreases the right
channel
decreases the left
channel
Stereo
Dual 1
Dual
MTS
SOUND 1/2
MENU
Back Watch TV
EXIT
Auto
Dual 1
Headphone level
Headphone
0
0
Mode 1
Bass
Treble
Bass 0
MENU
Back Watch TV
EXIT
SOUND 2/2
Balance
0
WOW
Stable sound
Off
Speaker
On
OK
MENU
Back Watch TV
EXIT
WOW
TruBass
High
SRS 3D
Off
FOCUS
On