Toshiba 50L7300U Flat Panel Television User Manual


  Open as PDF
of 186
 
Introduction
21
❖
Read “Important notes about your TV” on page 8.
❖
PlacetheTVontheoororasturdy,level,stablesurfacethat
can support the weight of the unit. Secure the TV to a wall,
pillar, or other immovable structure, see 24) on page 4.
❖
PlacetheTVinalocationwherelightdoesnotreectonthe
screen.
❖
Place the TV far enough from walls and other objects to allow
proper ventilation. Inadequate ventilation may cause overheating,
which will damage the TV. THIS TYPE OF DAMAGE IS NOT
COVERED UNDER THE TOSHIBA WARRANTY.
3 Do not plug in any power cords until after you have connected all
cables and devices to your TV.
4 Before connecting cables or devices to the TV, review the functions
of the TV’s connections and controls, see “Overview of cable types”
on page 27.
5 Connect your other electronic device(s) to the TV, see “Connecting
Your TV” on page 27.
6 Install the batteries in the remote control, see “Installing batteries”
on page 47.
7 See “Using the Remote Control” on page 47 for an overview of
the buttons on the remote control.
8 After connecting all cables and devices, plug in the power cords for
your TV and other devices. Then press the POWER button on the
TV control panel or remote control to turn on the TV.
NOTE:
If the TV stops responding to the buttons on the remote control or TV
control panel and you cannot turn the TV off or on, unplug the power cord
for a few seconds and then plug it in and try again.
9 See “Navigating the menu system” on page 62 for a quick
overview of navigating the TV’s menu system.
10 Program channels into the TV’s channel memory, see “Auto
Tuning” on page 66.
11 For details on using the TV’s features, see chapters 6, 7, and 8.
12 For help, refer to “Troubleshooting” on page 160.
13 Fortechnicalspecications,see“Specications”onpage169.
Overview of installation, setup, and use
 previous next