Filter
Top Products
20
You can play MP3, WMA or JPEG fi les that have been
stored on USB fl ash drives on the Blu-ray Disc™ player.
Operating a USB Flash Drive
Operating Media Player Function
Using a USB Flash Drive
Using Media Player Function
3
3
Press / to select a desired source, then
press to highlight an option, and press
OK.
Press
/ to select a desired source, then
press to highlight an option, and press
OK.
In Home Menu, press
/ to select Media,
and then press .
If no optical disc is inserted, the system will only
show USB fl ash drive.
In Home Menu, press
/ to select Media,
and then press .
If Media Player is set to “OFF”, Media Player
will not function.
2
2
1
1
Inserting a USB fl ash drive into the USB
port on the back of Blu-ray Disc™ player
until it clicks.
Set Media Player to “ON”.
For detailed operations, please refer to the
“Media Player” section in “System Setting”
on page 24.
For detailed operations, please follow the instructions in
“Playing fi les on a data disc” on page 19 for details.
Removing the USB Flash Drive
In stop mode, gently pull the USB fl ash drive out
slowly.
Notes:
• If you cannot easily insert the USB fl ash drive, you may
have inserted it incorrectly. Try to turnover the device
and then insert again.
• Do not remove the USB fl ash drive during playback.
Notes:
• Make sure your player is properly connected to the
network before using Media Player. Furthermore, you
need other Media Player servers in the network to see
and/or hear contents.
• Do not remove the LAN connector during playback.
Playback