Toshiba D-R1SU DVR User Manual


 
43
Playback
Recording
Editing
Function setup
Others
Introduction
Library
21:00 21:54
21:20
20 minutes
extend
Time Shift
22:14
Shifting a time period of a recording (Time
Shift)
If a prior TV program extends beyond its scheduled
time and into one that you programmed, you can shift
the programmed start and end time of the recording.
1) Press the REC MENU button.
The REC MENU appears.
2) Press the
/ buttons to select a timer
program you want to shift the time period.
3) Open the lid of the remote control and press the
EXTEND button.
Start Time and End Time are ready to be input.
4) Press the EXTEND button repeatedly.
Each time you press the button, Start Time and
End Time is shifted in 10 minutes intervals to, up
to 60 minutes later.
5) Press the ENTER button.
6) Press the REC MENU button to exit.
Note
After having shifted the time of a timer program which will
be repeated daily or weekly, restore the time if necessary.
Adding a timer program
1) Press the REC MENU button.
The REC MENU appears.
2) Press the
button to select a blank line, then
press the ENTER button.
3) Press the
/ buttons to select the item, then
press the ADJUST button to set the item.
4) When complete, press the ENTER button.
5) Press the REC MENU button to exit.
Note
While the recorder is preparing for or executing a
programmed recording, you cannot add a timer program
which will start within 5 minutes and 15 seconds from the
current time.
Deleting a timer program
1) Press the REC MENU button.
The REC MENU appears.
2) Press the
/ buttons to select a timer
program you want to delete.
3) Press the QUICK MENU button.
The Quick Menu appears.
4) Press the
/ buttons to select Program
Cancel, then press the ENTER button.
Check the message, then delete the entry.
5) Press the REC MENU button to exit.
Note
You cannot delete a timer program while another is
executed.
Correcting a timer program
1) Press the REC MENU button.
The REC MENU appears.
2) Press the
/ buttons to select a timer
program you want to change, then press the
ENTER button.
3) Press the
/ button to select an item, then
press the ADJUST button to set the item.
4) Press the ENTER button.
The modification is registered.
5) Press the REC MENU button to exit.
Important
You cannot correct a timer program within 5 minutes before
the recording start time. You can only delete the timer
program.
Note
You can program a timer recording whose start time has
already passed, unless the other program recording will
start within 5 minutes. A portion of the program before the
recording starts cannot be saved.
e.g.