Toshiba D-VR3SG DVD Recorder User Manual


 
English - 29
System Setup
28 - English
System Setup
Setting the Date
and Time
With the unit in Stop mode, press the MENU
button.
1
Select “Clock Set” using the buttons, then
press the
or OK button.
3
Programme
Programme
ShowView
Programme
ShowView Extended : Off
Using the buttons, move the selection bar
to “Setup” then press OK to select.
2
Press the

button to increase or decrease the
value.
• The day of the week is displayed automatically.
• You can hold the

buttons down to scroll
more quickly through the values.
5
On completion, press RETURN to exit the menu.
7
Press OK button, then the date and time will be
saved, if you don’t press OK button, it will not be
saved.
6
Press ¥ to select the hour, minutes, day,
month and year.
4
Note
You must have the aerial connected to set the
Auto Clock. Connecting the RF Cable On
page 18.
Your DVD Recorder-VCR contains a 24-hour clock and
calendar used to:
• Automatically stop programme recording
• Preset your DVD Recorder-VCR to record a pro-
gramme automatically You must set the date and time
• You must set the date and time when you purchase the
DVD Recorder-VCR
• Do not forget to reset the time when you change clocks
from winter to summer time and vice versa.
Presetting the Stations
Automatically
Open “MENU”
With the DVD in Stop press the MENU button.
1
Select “Setup”
Using the buttons, move the selection bar to
“Setup” then press
or OK to select.
2
Select “Install”
Using the buttons, move the selection bar
to “Install”, then press
or OK to select.
3
Select “Auto Setup”
Move the selection buttons to “Auto Setup”
then press
or OK button to select from the
following options:
4
Press OK button.
Amessage appears, indicating that any channels
already preset on the DVD Recorder-VCR will be
deleted.
6
Programme
Programme
Press [OK] to continue
[Menu] to exit
Press OK to start the auto
scaning.
• The first frequency band is scanned and the first
station found is displayed and stored. And the
DVD Recorder-VCR searches for the second
station and so on.
• When the automatic scanning procedure has
finished, the DVD Recorder-VCR switches
automatically to programme 1.
• The number of stations automatically stored by
the DVD Recorder-VCR depends on the num-
ber of stations that it has found.
7
Programme
TV System : G
36
Programme
You do not need to preset the stations if you have
already set them automatically (see Plug & Auto Set Up
on page 27).
Your DVD Recorder-VCR contains a built-in tuner used
to receive television broadcasts.
You must preset the stations received through the tuner.
This can be done:
• Plug & Auto Set up (see page 27)
• Automatically
• Manually (see page 30)
/
Programme
Select “Country ” using the ¥ buttons to
select your country.
5
MOVE OK EXIT
Auto Setup
Country Selection
Others