Toshiba D-VR3SG DVD Recorder User Manual


 
English - 3332 - English
System Setup
Edit
Delete
Swap
Press the orbutton to select Swap.
To change the programme number assigned to a
station press the OK button on the remote con-
trol.
• For example, to move a TV station in pro-
gramme 1 to programme 3).
6
Press the buttons to select required posi-
tion. And then press OK button again to swap the
position.
7
On completion, press the RETURN button four
times to exit the menu.
8
Press the buttons, until the required preset
TV programme is selected then press
or OK
button to select.
5
Changing the Preset
Manual Setup Table
You can rearrange the Manual Setup Table and give dif-
ferent programme numbers to the manual setup listed
according to your own preferences.
Open “MENU”
With the DVD in Stop mode, press the MENU
button.
1
Select “Setup”
Using the buttons, move the selection bar
to “Setup” then press
or OK button to select.
2
Select “Install”
Using the buttons, move the selection bar
to “Install”, then press
or OK button to select.
3
Select “Manual Setup”
Move the selection bar to “Manual Setup” using
the
buttons then press or OK button to
select.
4
Programme
Press the  button to select Delete.
Then press OK button to delete.
6
Press the ¥buttons to select Yes, and then
press the OK button.
7
Press the buttons to select a PR number
as required then press
or OK button to select.
5
Edit
Delete
Swap
Edit
Delete
Swap
PR.03
Do you want to delete 'PR.03'?
Yes No
Repeat the same procedure from Step 5
onwards until all the required stations have been
cleared.
8
On completion, press the RETURN button four
times to exit the menu.
9
System Setup
: Ch 36
TV System : G
Programme
Selecting the RF OUT
Sound Mode (B/G-D/K)
You can choose the sound mode (B/G or D/K) according
to the TV set connected to your VCR.
Open “MENU”
With the DVD in Stop mode, press the MENU
button.
1
Select “Setup”
Using the buttons, move the selection bar
to “Setup” then press
or OK button to select.
2
Select “TV System”
Move the selection bar to “TV System” using the
buttons then press or OK button to
select.
4
Press the or buttons to select G or K and
then press the OK button.
5
On completion, press RETURN to exit the menu.
6
Select “Install”
Using the buttons, move the selection bar
to “Install”, then press
or OK button to select.
3
: CH 36
TV System : K
K
G
Programme