Filter
Top Products
16
2.10 Looping Outputs
The 8 and 16 Channel DVR units may have up to 16 Looping outputs. Depending on the destination of the
outputs, each output may have to be terminated (See section 2.10).
Looping Outputs – The Video inputs are RG-59 BNC connectors. Make sure there is a video source connected
to the input and then connect a cable to the Channel Out. The looping outs can be connected to video monitors or
combined with adapters to connect to VCR’s.
2.11 Additional Outputs and Connectors
Operation
LED
4
Signal Line
Signal Line
Grou
RX LED
TX LED