Filter
Top Products
RECORDING
OPERATION
PREPARATION
INTRODUCTION
PLAYBACK
OPERATION
NOTICE
26
IF A POWER FAILURE SHOULD OCCUR
If a power failure occurs, the PW.FAIL display appears
in the VCR display. To erase this display press one of
the operations buttons.
If the power failure is recovered within 10 days, and the
battery is charged continuously for more than 48 hours
in the ambient temperature, the date/time data and
timer recording programs remain in the memory.
EXT ON 120
SU2 ON -:--- -:--- 120
SU1 ON -:--- -:--- 120
SA2 ON -:--- -:--- 120
SA1 ON -:--- -:--- 120
DLY ON 8:30 5:00 A24
PROGRAM
FR1 ON -:--- -:--- 120
MENU=[DISPLAY]
FR2 ON -:--- -:--- 120
➜
➜
➜
➜
➜
➜
➜
SP
SP
SP
SP
SP
SP
SP
SP
AM PM
Notes:
If the TIMER button is pressed at the moment between
start time and end time, recording starts immediately.
To cancel the timer recording, press the TIMER button.
The timer recording starts 10 seconds before the record
start time.
When the end time is set to a time earlier than the start time, the
recording is carried out up to the end time in the next day.
The time difference between start time and end time
should be more than 1 minute. If they are same, timer
recording doesn’t work.
The accuracy of the time display depends on the condi-
tions of use and the environment. Set clock to the exact
time by daily check.
During timer power off mode, alarm recording will not
operate at all.
During the 12 hour display, the display appears as follows.
EXT ON 120
SU2 ON --:-- --:-- 120
SU1 ON --:-- --:-- 120
SA2 ON --:-- --:-- 120
SA1 ON --:-- --:-- 120
DLY ON 8:30 17:00 120
PROGRAM
FR1 ON --:-- --:-- 120
MENU=[DISPLAY]
FR2 ON --:-- --:-- 120
➜
➜
➜
➜
➜
➜
➜
SP
SP
SP
SP
SP
SP
SP
SP
8
Press the SHIFT
button and the + SET
button to set recording
time mode to
SPA24.
DISPLAY
TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+–
7
Press the SHIFT
button to blink end time.
Set end time to 17:00
with the SET button and
the
SHIFT button in
the same manner as 6.
DISPLAY
TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+–
EXT ON 120
SU2 ON --:-- --:-- 120
SU1 ON --:-- --:-- 120
SA2 ON --:-- --:-- 120
SA1 ON --:-- --:-- 120
DLY ON 8:-- --:-- 120
PROGRAM
FR1 ON --:-- --:-- 120
MENU=[DISPLAY]
FR2 ON --:-- --:-- 120
➜
➜
➜
➜
➜
➜
➜
SP
SP
SP
SP
SP
SP
SP
SP
6
Press the + or – SET
button and the
SHIFT
button to set start time to
8:30.
DISPLAY
TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+–
EXT ON 120
SU2 ON --:-- --:-- 120
SU1 ON --:-- --:-- 120
SA2 ON --:-- --:-- 120
SA1 ON --:-- --:-- 120
DLY ON 8:30 --:-- 120
PROGRAM
FR1 ON --:-- --:-- 120
MENU=[DISPLAY]
FR2 ON --:-- --:-- 120
➜
➜
➜
➜
➜
➜
➜
SP
SP
SP
SP
SP
SP
SP
SP
The power goes off and the TIMER display lights in the
VCR display.
Recording starts at the programmed start time.
10
Press the TIMER button.
DISPLAY
TIME MODE
SET
SHIFT
TRACKING
LOCATION SELECT
+–
9
Press the DISPLAY
button twice to erase the
MENU screen.
17:30:02 A 2
8/28/97 THU
SP
The TIME MODE button is pressed, the display
changes as follows.
SP120 → 120 → SP168 → 168 → SP240 → 240 →
SP480 → 480 → SP720 → 720 →SP960 → 960 →
SPL01 → SPL02 → SPL03 → SPA2 → A6 → SPA12 →
A18 →
SPA24 → SP24 → 30 → SP48 → 48 → SP72 →
72 →
SP120
The
TIME MODE button is pressed, the display
changes in the reverse direction.
EXT ON 120
SU2 ON --:-- --:-- 120
SU1 ON --:-- --:-- 120
SA2 ON --:-- --:-- 120
SA1 ON --:-- --:-- 120
DLY ON 8:30 17:30 120
PROGRAM
FR1 ON --:-- --:-- 120
MENU=[DISPLAY]
FR2 ON --:-- --:-- 120
➜
➜
➜
➜
➜
➜
➜
SP
SP
SP
SP
SP
SP
SP
SP
EXT ON 120
SU2 ON --:-- --:-- 120
SU1 ON --:-- --:-- 120
SA2 ON --:-- --:-- 120
SA1 ON --:-- --:-- 120
DLY ON 8:30 17:00 A24
PROGRAM
FR1 ON --:-- --:-- 120
MENU=[DISPLAY]
FR2 ON --:-- --:-- 120
➜
➜
➜
➜
➜
➜
➜
SP
SP
SP
SP
SP
SP
SP
SP
REC
H
SP
TIMER
TIMER