Filter
Top Products
NOTICE
PREPARATION
INTRODUCTION
RECORDING
OPERATION
PLAYBACK
OPERATION
ALARM SEARCH
With the alarm search function, it is possible to search for
alarm that has been recorded on the tape.
Search Operation
1
Press the STOP button.
2
Press the COUNTER MEMORY button twice to make
“ALARM M” to light.
3
Turn the SHUTTLE dial to set rewind or fast forward.
4
Press the PLAY button.
When the tape reaches the
alarm recorded position, The
VCR automatically enters the
still picture mode.
REC
ALARM
H
SP
ALARM
ALARM
M
H
PLAY
SP
ALARM
ALARM
M
H
SP
PLAY
STOP
COUNTER
ALARM RESETMEMORY
PLAY
STOP
REV FWDREV FWDREV FWD
43
Notes:
In the cases shown below, Alarm Memory search may be not carried out.
If the alarm recording is not carried out for more than those listed in the following chart then, the alarm may be skipped.
If the alarm recording interval is not left for more than those listed in the following chart then, the alarm may be skipped.
If there is not enough time between the beginning of the alarm search and the first alarm activation. If the time period is shorter
than those listed in the following chart then, the first alarm may be skipped.
Record
mode
SPA2 or EPA6
SPA12
EPA18
SPA24
Minimum alarm recording time
needed
2 s
15 s
7 s
30 s
Minimum recording time needed between start of
search and first alarm activations
5 s
35 s
15 s
65 s
Minimum alarm recording interval
needed
7 s
50 s
25 s
95 s