Toshiba SD-P2700 DVD Player User Manual


 
65
Connections
To turn the LCD monitor
1 Put the player on a level place such as a desk.
2 Open up the LCD monitor vertically.
3 Hold the LCD monitor on both sides and turn it slowly 180 degrees to the left until it clicks.
Notices
The LCD monitor does not turn over 180 degrees or to the right.
Do not force the LCD monitor to turn over 180 degrees or to the right otherwise. It may damage the LCD monitor.
Do not turn the LCD monitor without opening up vertically. Otherwise, it may scratch the disc cover.
To fold up the LCD monitor side up
1 After having turned the LCD monitor, move the latch down and insert it into the slot until it clicks.When
you have a problem in inserting the latch, press the Open switch and put the latch into the correct
position. Then insert it again.
To put back the LCD monitor
1 Press the Open switch and release the latch.
2 Open up the LCD monitor vertically.
3 Hold the LCD monitor on both sides and turn slowly 180 degrees to the right untill it clicks.
Notices
Do not store the LCD monitor with the screen side up. Otherwise, the LCD monitor will get dust on the screen or be damaged
by an unexpected shock.
Do not turn the LCD monitor without opening up vertically. Otherwise, it may scratch the disc cover.
To turn the LCD monitor
You can turn the LCD monitor 180 degrees to the left. In addition, you can also fold up the player to operate it with the
LCD monitor side up.
SD-P2700_E_P63-66 04.9.22, 13:1465