Filter
Top Products
GRUPAd.o.o.
Correct operating procedures
9
EN
The functions will differ depending on the model and
system.
* For further details, refer to the operating instructions
of the air conditioner.
Operation
1 Hold down the grille button (47) for at least
4 seconds.
• The display transfers to the grille up/down screen,
and the indoor units stop operating.
• The filter , grille up/down and numeric display
blink.
* The “no function” display appears when the
grille is not connected or the control settings have
not been established correctly.
2 Push the button (37), and select the indoor
unit for which the grille is to be set.
• Each time the button is pushed, the unit number on
the numeric display changes.
* The fan of the selected indoor unit starts running,
and the louver swings.
3 Push the TEMP or button (49) to move the
up/down grille.
• When the button (49) is pushed, the up/down
grille goes down slowly; conversely, when the
button (49) is pushed, the up/down grille goes up.
• If the up/down grille makes contact with an obstacle
while it is going down, it stops.
• Several seconds after the up/down grille rises and
is neatly stowed in the air intake, the motor stops.
* The louver swings while the grille is going up or
down.
* When the grille is stowed in the panel, this
stowing operation is repeated 3 times to ensure
that the grille is safely stowed away.
4 Push the button (32) to stop the up/down
grille.
• The up or down movement of the up/down grille
now stops.
• If the button (32) is not pushed and the
grille continues to move down, the grille will
automatically stop when it has moved down to the
distance set.
* To change the movement from up to down or vice
versa, stop the up/down grille movement first,
and then make the change.
5 Push the grille button (47).
• The grille operation mode is exited.
• The filter , grille up/down and numeric display
goes off, and blinks.
* While is blinking, there is no response
to the keys of the remote controller even when
they are pushed.
The functions will differ depending on the model and
system.
• For descriptions of the following settings, refer to the
operating instructions of the air conditioner.
– Changing the swing type
– Fixing or releasing the louvers
– Changing the save operation settings
Grille operation procedure Detailed settings
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, www.toshiba.hr, e-mail: toshiba@mbfrigo.hr