Filter
Top Products
GRUPAd.o.o.
Scheduled operations
14
• When setting the operation programs, the already
programmed settings for another days of the week
can be copied for an specially designated day of the
week.
* The program settings can be copied whether the air
conditioner is running or shut down.
Copying the program settings
1 Push the button (46).
• The display transfers to the program input screen.
• The entire LCD screen blinks.
2 Push the button (45).
• Repeatedly push the button until the day arrow
moves to the copy source day of the week.
3 Push the button (42).
• Enter the copy source day of the week.
• The days of the week display and day arrow
stop blinking and light up.
4 Push the button (37).
• Repeatedly push this button until
“PG-CP” (shown right) appears on
the numeric display.
* PG-CP ..... P
ROGRAM-COPY
5 Push the button (42).
• The “ ” display stops blinking and lights up.
• The day of the week where the day arrow is
lighted serves as the copy source.
6 Again push the button (45).
• Repeatedly push the button until the day arrow
moves to the copy destination day of the week.
• The day arrow blinks while the copy destination
is being selected.
7 Push the button (42).
• The settings of the copy source day of the week are
copied into the copy destination day of the week.
• The blinking of the day arrow displayed for the
copy destination day of the week changes to the
lighted operation reservation display.
* Copying involves overwriting any existing
settings.
Bear in mind that the original setting of the copy
destination will be deleted when the button
(42) is pushed.
8 To continue copying, repeat steps 4 to 7.
9 Finally, push the button (46) to return to the
original screen.
• Operation programs which have been set can be
cleared (deleted) in two ways.
1.All the programs for a specific day of the week can
be cleared.
2.A specific program on a specific day of the week can
be cleared.
* The program settings can be cleared whether the air
conditioner is running or shut down.
How to clear the program settings
How to clear the programs for a specific day of the
week
1 Push the button (46).
• The display transfers to the program input screen.
• The entire LCD screen blinks.
2 Push the button (45).
• Repeatedly push the button until the day arrow
moves to the day of the week whose programs are
to be cleared.
3 Push the button (42).
• Enter the day of the week whose programs are to
be cleared.
• The days of the week display and day arrow
stop blinking and light up.
4 Push the button (37).
• Repeatedly push this button until
“PG-CL” (shown right) appears on
the numeric display.
* PG-CL ...... P
ROGRAM-CLEAR
5 Push the button (42).
• The settings of all the programs which have been
set and displayed for the day of the week are
cleared (deleted), and the no program set status
blinks on the screen.
* Bear in mind that cleared settings cannot be
restored.
6 To continue clearing, repeat steps 2 to 5.
7 Finally, push the button (46) to return to the
original screen.
Editing the operation programs
(instructions for copying)
Editing the operation programs
(instructions for clearing)
MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, www.toshiba.hr, e-mail: toshiba@mbfrigo.hr