20
Connecting to a TV equipped with component video inputs
If your TV has component video inputs, you can obtain pictures in better quality.
Connections
• Make the following setting.
On-screen display
Select
Page
“Audio out select”“Analog 2ch” page 42
Component video outputs/inputs
Some TVs or monitors are equipped with component
video inputs. Connecting to these inputs allows you to
enjoy higher quality picture playback.
Actual labels for component video inputs may vary
depending on the TV manufacturer. (ex.Y, R-Y, R-B or
Y, C
B, CR)
In some TVs or monitors, the color levels of the
playback picture may be reduced slightly or the tint
may change. In such a case, adjust the TV or monitor
for optimum performance.
To switch the output signal (Progressive/Interlaced)
Press PROGRESSIVE on the remote control.
The output signal alternates between
component progressive and component
interlaced.
Notes
• Refer to the owner’s manual of the connected TV as well.
• When you connect the recorder to other equipment, be sure to turn off the power and unplug all of the equipment from the
wall outlet before any connections.
• If you place the recorder near a tuner or radio, the radio broadcast sound might be distorted. In this event, place the recorder
away from the tuner and radio.
• The output sound of the recorder has a wide dynamic range. Be sure to adjust the audio amplifier’s volume to a moderate
listening level. Otherwise, the speakers and your hearing may be damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the recorder’s power cord. If you leave the amplifier power on, the
speakers may be damaged.
To audio inputs of the
amplifier
To P
R VIDEO OUT
(white)(red)
(white)(red)
To P
B VIDEO OUT
To Y VIDEO OUT
To Y video input
To P
B video input
To P
R video input
TV or monitor equipped with
component video (INTERLACED/
PROGRESSIVE) inputs
Audio cable (not supplied)
Video cable
(not supplied)
PROGRESSIVE
VIDEO
L
R
VIDEORL
R
L VIDEO
S-VIDEO
S-VIDEO
S-VIDEO
P
B
Y
P
R
S-VIDEOVIDEO
LR
VIDEO
INPUT1
INPUT3
IR
DIGITAL AUDIO OUTPUT
BITSTREAM/PCM
OPTICALCOAXIAL
OUTPUT2
COMPONENT OUTPUT
OUTPUT1
CHANNEL
CHANGE