Filter
Top Products
43
Introduction
Connections
Basic Setup
4
Press / to select the output sound format.
Bitstream:
Select when connected to an amplifier equipped with a
Dolby Digital, DTS, MPEG1 and MPEG2 decoder. (
pages 22, 23)
The recorder outputs digital audio information in the
bitstream format when you play a DVD video disc
recorded on the Dolby Digital, DTS, MPEG1 and
MPEG2 recording system.
Analog 2ch:
Select when connected to a TV or audio system via the
analog audio jacks. (
pages 20, 22)
PCM:
Select when connected to a 2 channel digital stereo
system. (
page 24)
The recorder outputs sounds in the PCM 2ch format
when you play a DVD video disc recorded on the Dolby
Digital, MPEG1 and MPEG2 recording system.
5
Once the proper setting is selected, press
ENTER.
The submenu disappears.
To exit the setting menu, press the SETUP button.
“B: Output sound setting” is complete. Go to “C: TV shape setting”. ( page 44)
ENTER
ENTER