Filter
Top Products
ENG-65
Changing
Setup Menu
ΠTV Aspect
Depending on the type of television you have,
you may want to adjust the screen setting
(aspect ratio).
- 4:3 Letter Box : Select when you want to
see the total 16:9 ratio screen DVD
supplies, even though you have a TV with a
4:3 ratio screen. Black bars will appear at
the top and bottom of the screen.
- 4:3 Pan & Scan : Select this for conventional
size TVs when you want to see the central
portion of the 16:9 screen. (Extreme left and
right side of movie picture will be cut off.)
- 16:9 Wide : You can view the full 16:9
picture on your wide screen TV.
´ Still Mode
These options will help prevent picture shake
in still mode and display small text clearer.
- Auto : When selecting Auto, Field/Frame
mode will be automatically converted.
- Field : Select this feature when the screen
shakes in the Auto mode.
- Frame : Select this feature when you want
to see small letters more clearly in the Auto
mode.
ˇ Screen Messages
Use to turn on-screen messages On or Off.
¨ Black Level
Adjusts the brightness of the screen.(On or
Off) It does not function in Progressive mode.
ˆ TV System
1. NTSC Disc : In case of using NTSC disc
• If your TV system only has PAL-Video
input, you must choose “PAL”. When you
choose “PAL”, Interlace output format is
PAL 60 Hz output or Component (I-Scan)
480i.
• If your TV system only has NTSC input,
you must choose “NTSC Output”.
2. PAL Disc : In case of using PAL disc
• If your TV system only has NTSC-Video
input, you must choose “NTSC Output”.
• If your TV system only has PAL input, you
must choose “PAL Output”.
Ø Video Output
Select Video Output.
- COMPOSITE/S-VIDEO : Select when you
want to use Video and S-Video Out.
- COMPONENT(I-SCAN) : Select when you
want to use Video and Component
525i(480i)/625i(576i) (Interlace) Out.
- HDMI/COMPONENT(P-SCAN) : Select
when you want to use Component
525p(480p)/625p(576p) (Progressive) Out
or HDMI.
• If the Yes/No selection in the Display Setup
sub Menu is not made within 10 seconds,
the screen returns to the previous menu.
• Video Output mode can also be changed
in the following sequence in no disc mode
by pressing the V.OUT button.
COMPOSITE/S-VIDEO ➝ COMPONENT(I-SCAN)
HDMI/COMPONENT(P-SCAN)
If HDMI/COMPONENT(P-SCAN) mode is
selected and your TV does not support
HDMI or progressive scan, you cannot see
any picture. Press the V.OUT button until
the picture can be seen on the screen.
TV ASPECT
4:3 Letter Box
4:3 Pan&Scan
16:9 Wide
DISPLAY SETUP
DISPLAY SETUP
COMPOSITE/S-VIDEO
COMPONENT(I-SCAN)
HDMI/COMPONENT(P-SCAN)
Changing Setup Menu
TV Aspect : 4 : 3 L-Box √√
Still Mode : Auto
Screen Messages : On
Black Level :Off
TV System :PAL
Video Output :
COMPOSIT/S-VID
√√
HDMI : 480p √√
00873A-SD-6980SY-2 8/23/05 4:47 PM Page 65