Filter
Top Products
ENG-70
Reference
Setting Control Codes
1. Press TV to set the remote control operating your TV.
2. While holding down PROGRAM button, enter the four diglts of your TV’s brand code (listed right)
using number buttons.
3. Release PROGRAM.
4. Point the remote control at your TV and use each button listed below to make sure your TV is
operated correctly.
ON/STANDBY
To turn the TV on or off.
CH
To select TV channels in the upper or lower direction.
VOL
To adjust the sound level.
INPUT
To select an external source such as a VCR.
DISPLAY
To turn on or off TV’s screen display.
ENTER
To use for the TV’s ENTER key.
Controlling a TV with the Remote Control
The remote control can be compatible with various brands of TV by setting their
control codes. The TOSHIBA code has initially been set to control TOSHIBA TVs.
00873A-SD-6980SY-2 8/22/05 4:40 PM Page 70