Filter
Top Products
18
Connecting to a TV
Connect the DVD video player to your TV.
For details of output sound, see 42 .
ee
.
Connecting to a
TV
Notes
● Refer to the owner’s manual of the connected TV as well.
● When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the
wall outlet before making any connections.
● If your TV has one audio input, connect the left and right audio outputs of the DVD video player to a Y cable adapter
(not supplied) and then connect to your TV
● connect the DVD player directly to your TV. If you connect the DVD video player to a VCR, TV/VCR combination or
video selector, pl
ayback picture may be distorted as DVD video discs are copy protected.
● Analog audio out will not have sound DTS playback.
If the TV has an S video input,
connect the DVD video player with
an S video cable. When using an
S video cable, do not connect the
yellow video cable.
S video cable (not supplied)
(white)
(red)
(yellow)
To audio inputs
To S video input
To S VIDEO
OUT
To VIDEO
OUT
To ANALOG AUDIO OUT
Audio/video cable (supplied)
(white)
(red)
(yellow)
To video input
TV or monitor with
audio/video inputs
To wall outlet
On-screen display Select: Page
“Digital Output”
“Bitstream”
or
“PCM”
56
60
“Video Output”
CVBS
59
● Making the following setting.
Signal Flow
Connections
Connecting to a TV