Filter
Top Products
11
Connections
Connections
Connecting to a TV
Connect the DVD player to your TV.
Notes
• Refer to the owner’s manual of the connected TV as well.
• When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any
connections.
• If your television set has one audio input, connect the left and right audio outputs of the DVD player to a Y cable adapter (not supplied) and
then connect to your TV.
• Connect the DVD player directly to your TV. If you connect the DVD player to a VCR, TV/VCR combination or video selector, the playback
picture may be distorted as DVDs are copy protected.
• Analog audio out will not have sound if DTS playback is selected.
Connecting to a TV
Connecting to a TV (Using the component video jacks)
Interlaced outputs (ColorStream
®
)
Some TVs or monitors are equipped with component video inputs.
Connecting to these inputs allows you to enjoy higher quality
picture playback.
Actual labels for component video inputs may vary depending on
the TV manufacturer. (ex. Y, R-Y, B-Y or Y, CB, CR)
In some TVs or monitors, the color levels of the playback picture
may be reduced slightly or the tint may change. In such a case,
adjust the TV or monitor for optimum performance.
Progressive outputs (ColorStream Pro
®
)
Some TVs or monitors are equipped with component video inputs
that are capable of reproducing a progressively scanned video
signal. Connecting to these inputs allows you to view the highest
quality pictures with less flicker.
Consumers should note that not all high definition television sets
are fully compatible with this product and may cause artifacts to
be displayed in the picture. In case of 480 progressive scan picture
problems, it is recommended that the user switch the connection to
the “standard definition” output. If there are questions regarding our
TV set compatibility with this model 480p DVD player, please contact
our Customer Service Center.
NormalTV
To audio
input
To video
input
(yellow)
ToVIDEO
OUT
(yellow)
To 2ch AUDIO OUT
(R:red, L:white)
Audio/Video cables (supplied)
Y
VIDEO
PB PR
HDMIOUT
ANALOG
COAXIALDIGITAL
RL
VIDEO OUT
AUDIO
OUT
• Make the following setting.
On-screen display
Select:
Page
“Off”,
“PCM” or
“Raw”
“Digital Output”
“Video Out”
Component
P-Scan
HDMI
31
32
To audio input
To 2ch AUDIO OUT
(R:red, L:white)
Y
VIDEO
P
B
P
R
HDMIOUT
ANALOG
COAXIALDIGITAL
RL
VIDEOOUT
AUDIO
OUT
ToY video
input
To P video
input
B
To P video
input
R
Audio cable (not supplied)
Component video cable (not supplied)