Filter
Top Products
14
Connections
Dolby Surround Pro Logic
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting
an amplifier and speaker system (right and left front speakers, a center speaker,
and one or two rear speakers).
With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in “Connecting to an amplifier
equipped with a Dolby
®
Digital decoder.” Refer to that amplifier’s owner’s manual
and set the amplifier so you can enjoy Dolby Surround Pro Logic sound.
With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
* Connect one or two rear speakers.
The output sound from the rear speakers will
be monaural even if you connect two rear
speakers.
• Make the following setting.
On-screen display Select:
Page
“Digital Output”
32
Connecting to an amplifier equipped with Dolby Surround Pro Logic
Audio cable (not supplied)
Connecting to Optional Equipment (Continued)
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the latest
movies, and is now available to reproduce this realistic effect in the home. You can
enjoy motion picture and live concert DVDs with this dynamic realistic sound by
connecting the DVD player to a 6 channel amplifier equipped with a Dolby Digital
decoder or Dolby Digital processor. If you have a Dolby Surround Pro Logic decoder,
you will obtain the full benefit of Pro Logic from the same DVD movies that provide
full 5.1-channel Dolby Digital soundtracks, as well as from titles with the Dolby
Surround mark.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.
• Use DVDs encoded via the Dolby
Digital recording system.
• Make the following setting.
On-screen display
Select:
Page
“PCM” or
“Raw”
“Digital Output”
Connecting to an amplifier equipped with a Dolby
®
Digital decoder
75
Ω Ω
Ω Ω
Ω coaxial cable (not supplied)
32
To COAXIAL
DIGITAL
AUDIO OUT
To COAXIAL
type digital
audio input
Amplifier equipped with a
Dolby Digital decoder
To wall
outlet
To ANALOG
AUDIO OUT
To audio
input
Amplifier equipped with
Dolby Surround Pro Logic
To wall
outlet
“PCM” or
“Raw”