Filter
Top Products
5/29 SD-R5112 Rev.1.0
(9) Load/Eject (a) Electrical Load/Eject (Eject Button)
(b) Load/Eject by ATAPI command
(c) Emergency Eject
(10) Air Flow Not Required
(11) Acoustic Noise 40 dB (IEC 179 A weighted at 1 m)
(12) Power Supply +5 V , +12 V (details in Section 7)
3.2. Environmental Conditions
This drive should be used under the conditions listed below.
3.2.1.Temperature and Humidity
(1) Operating Temperature 5 °Cto 50 °C
*1
(2) Storage Temperature -10 °C to 60 °C
(3) Shipping Temperature -40 °C to 65 °C
*2
(4) Operating Temperature Gradient 11 °C/hour (max)
(5) Storage Temperature Gradient 20 °C/hour (max)
(6) Shipping Temperature Gradient 20 °C/hour (max)
*2
(7) Operating Humidity 8 % to 80 % (Wet bulb Maximum Temperature 27 °C)
(8) Storage Humidity 5 % to 95 % (Wet bulb Maximum Temperature 40 °C)
(9) Shipping Humidity 5 % to 95 %
*2
(Wet bulb Maximum Temperature 40 °C)
(10) Condensation In all the above conditions there must be no condensation
*1: Excluding medium.
*2: Packed in Toshiba original shipping package.