Filter
Top Products
61
Function setup (DVD)
Parental control setting
Some discs are specified not suitable for children. Such discs can be limited
not to play back with the unit.
Parental control setting
Press ENTER to store the password.
Note: Now the rating is locked and the
setting cannot be changed unless you
enter the correct password.
Press SETUP or RETURN to remove the paren-
tal control screen.
4
5
Notes:
• If each setup (pages 57~66) has been completed, the
unit can always be worked under the same
conditions (especially with DVD discs).
Each setup will be retained in the memory if you turn
the power off.
• Depending on the discs, the unit cannot limit playback.
• Some discs may not be encoded with specific rating
level information though its disc jacket says “adult.” For
those discs, the age restriction will not work.
ENTER
▲/▼/
/
RETURN
SETUP
0–9
CANCEL
VCR MENU
SETUP
RETURN
SET
+
SET
–
CH
–
CH
+
ENTER
Press SETUP in the stop mode or No Disc.
Press
or to select “Parental”. Then press
or ENTER.
Press or to select “Parental”, then press
or until the level you require appears.
1
2
3
0
8
7 9
654
321
VCR MENU
SETUP
SET
+
SET
–
CH
–
CH
+
ENTER
SET
+
SET
–
CH
–
CH
+
ENTER
SET
+
SET
–
CH
–
CH
+
ENTER
• Level Off:
The parental control setting does not function.
• Level 8: All DVD software can be played back.
• Level 1: DVD software for adults cannot be played
back.
• Select from the level 1 to level 8. The limitation will be
more severe as the level number is lower.
Press or to select “Password”.
Press number buttons (0
-
9) to input a 4-digit password.
Be sure to remember this number!
• If you input a wrong number,
press CANCEL.
2C53301C (E)p58-61 21/4/04, 11:1561